Thursday, July 25, 2013

About the GPS Tracker drift

Earliest ,GPS tracker because accept ability is weak, always broken, to be used for navigation, especially in the city to travel caused many inconvenience. Later development some civilian GPS chip, the signals are not strong in the GPS signal is income, thus causing the drift phenomenon.

Xtrac technology of GPS signal will be gone with the wind are most frequently happened problems (Gao Gan degrees of GPS is mostly use Xtrac technology, GM - 270 - u), because it is the use of computing to locate the weak signal amplification, and the satellite signal all the time change, so the GPS continuous operation to correct error, when the received signal before and after very different, you will see the drift phenomenon. Navigation software is only receive signals from the GPS, the positioning signal appeared on the screen, so it has nothing to do with the signal drift, is purely a GPS receiver position error.

Moreover, the error of the GPS who number is 5 ~ 25 meters, lock road map software programming is about, of course, but the receiver factor is larger.
Last used GPS coordinates system and the electronic map coordinates system (rare) are the same?

GPS cold startup, warm startup, warm start
GPS trackers  boot is divided into cold start and warm start and hot start:
Cold start, the following several ways on cold start. Used for the first time; Ephemeris information loss, as a result of its battery runs out; Shutdown condition. Move the receiver more than 1000 km distance.
Start temperature: distance from the last location for more than two hours started.

Thermal activation: distance positioning time is less than two hours to start last time.