Products (GPS
Vehicle Tracker) before the installation, first check whether the
customer vehicle normally, with and without scratches, etc., the customer can
confirm before the installation.
 |
| GPS Vehicle Tracker TK103-2 |
Although GPS terminal installation and for
simple, but still need to pay attention to the following:
1. GPS terminal connected to the GPS and GSM
communication two antenna, the antenna interface appearance is same, please
note that the logo on the shell.
2. the connection of power supply products
damaged host the positive and negative answer get blank brains, the
installation process don't plug them in advance.
3. not to install the emergency button on
the corresponding vehicle without emergency alarm, emergency button for wearing
parts, do not forcibly pressure.
4. host, high precision electronic
products, the installation position should notice moistureproof, waterproof,
dustproof, high temperature. Equipped with the GPS antenna to navigation and
high precision
The top of the antenna, but when
installation should be positive and avoid metal block directly. Suggest to
install the GPS antenna in the front (back) below the windshield,Or bumper
(nonmetal materials).
5. equipped with the GSM antenna is high
sensitivity communication antenna, receiving good results, but suggested that
avoid disturb when installation.
6. such as car alarm needed, it is
recommended that all the parts as far as possible hidden installation.
